{"title":"Nissan Titan","description":null,"products":[{"product_id":"2004-2015-nissan-titan-front-bumper-kit","title":"2004-2015 Nissan Titan Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 1st generation (2004-2015) Nissan Titan. It features a low profile design, bolt-on construction, protected winch mount and the best approach angle on the market. The high clearance design makes your Titan look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to run 37\" tires without any bumper interference. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Titan. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a very reasonable weight of 115lbs (or 57lbs in aluminum) through careful design work. This means less stress on your suspension and drivetrain components.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 1st generation (2004-2015) Nissan Titan as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. This bumper uses a total of 14 mounting points to solidly mount it to the frame and includes weight distributing frame brackets that bolt in position between the bumper and frame. This mounting system distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren't previously possible. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \\n \\nWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Nissan Titan frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Nissan Titan frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Nissan Titan frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 115lbs for the steel bumper and 57lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Nissan Titan is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eThis bumper is also available with an optional lower skid plate that protects your vulnerable radiator and engine bay parts and provides even more additional ground clearance. It has CNC cut outs that improve airflow to the radiator as well as raised sides that stiffen the skid plate and prevent debris from entering the engine bay from the sides. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2013-2015 Models\u003c\/strong\u003e: For the 2013-2015 model years of the Titan, Nissan excluded the frame nuts welded into the front of the frame rails. If you select the 2013-2015 model year option, a pair of weld-in frame plates will be included with your bumper kit. These will need to be welded onto the vehicle's frame to provide proper winching strength. Alternatively, lag bolts and plates can be inserted into the frame and used instead if you prefer not to modify your frame. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (73lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 14 factory mounting points \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncluded weight distribution brackets direct winch and impact forces evenly into the frame. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264246272284,"sku":"CO0933","price":887.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_2bc31da7-dbf6-49a8-b101-d82f2a5b5451.jpg?v=1783513447"},{"product_id":"2004-2015-nissan-titan-low-profile-rear-bumper-kit","title":"2004-2015 Nissan Titan Low Profile Rear Bumper Kit","description":"\u003cp\u003eThis is a low profile DIY weld-together rear bumper kit for the 1st generation (2004-2015) Nissan Titan. This bumper provides substantially increased ground clearance and rear end protection over the stock bumper. This has been achieved through the use of 3\/16\" thick plate steel (optional 1\/4\" aluminum available) and a sleek profile that sits tighter to the tailgate than the stock bumper. To top it off, this bumper comes with built-in mounts for the stock license plate lights and reverse sensors. Simply remove them from your stock bumper and pop them into the CNC cut holes in this bumper. No splicing or extending of wires required.  Additionally, it requires no modifcation to the frame or bedsides of the truck and uses all factory mounting points. The sloping rear profile and recessed hitch receiver further increase clearance and provide a smooth surface to slide over obstacles, significantly improving the offroad capability of your Titan!\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and departure angles put first. The bumper sits as high and tight to the rear frame crossmember of the 1st generation 2004-2015 Nissan Titan as possible, while the angled side wing faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper provide heavy duty plate protection that wraps underneath the vehicle. These side wings will take a serious hit without flexing or deflecting into the vehicle body. The hitch receiver in this bumper is recessed into the bumper and angled at a 45 degree angle so it will smoothly slide over obstacles and ensure you do not get hung up on the trail. These features make a very noticeable difference during deep ditch crossing and steep obstacle climbs where other aftermarket bumpers with bulky rear profiles and protruding hitch receivers will hang up and impede progress on the trail. Simply put, this bumper allows you to forget about departure angle and substantially improves the offroad capability of your Titan! \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with optional single and dual swing out carriers, two integrated light buckets for surface mount LED pod lights (custom cut outs available by request), and heavy duty 9\/16\" recovery points that are placed directly in line with the Nissan Titan frame to eliminate any leveraging effects. These recovery points are formed out of laser cut steel plates that pass through the bumper shell and tie directly into the bumper's main mounting points on the Nissan Titan frame. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Nissan Titan frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 90lbs for the steel bumper and 44lbs for the aluminum version. Considering that this bumper replaces your factory bumper, hitch receiver and associated components, the resulting weight increase to your Nissan Titan is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit comes with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required. Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plug. \u003c\/p\u003e\u003cp\u003eThe swing out tire carrier comes in either a single or dual sided configuration and is built to accept a tire up to \u003cstrong\u003e37\" in diameter! \u003c\/strong\u003eBoth carriers include mounting brackets for a hilift jack and other recovery items. The dual swing out includes the hilift mount as well as a lockable jerry can holder designed to fit two 20L NATO style jerry cans. These carriers feature heavy duty chromoly heim joint hinges, 2000lb toggle latches, T-handle spring pins, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs and the dual swing out add-on with gas can holder weighs 77lbs. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSlim profile is engineered to provide maximum ground clearance and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFully compatible with the factory license plate lights and parking sensors - simply pop them out of your stock bumper and into this replacement bumper \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum construction for a lightweight yet very durable overlanding setup (46lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRecessed 2\" hitch receiver for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompatible with \u003cstrong\u003esome\u003c\/strong\u003e factory and aftermarket hitch receivers - please email us photos of your hitch receiver for confirmation \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMounts directly to the frame using 8 factory mounting points - no drilling required. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAll kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional Single and Dual Swing out carriers with spare tire mount, hilift jack mount and locking dual NATO can holder (dual swing out only) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated LED light mounts in the bumper include slotted mounting tabs that give tons of adjustment to fit a variety of lights\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264246370588,"sku":"CO0932","price":783.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_177b2f6a-749a-4175-b696-551a5780a5ed.jpg?v=1783513447"},{"product_id":"2016-2019-nissan-titan-xd-front-bumper-kit","title":"2016-2022 Nissan Titan XD Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the 2nd generation (2016-2019) Nissan Titan XD. It features a low profile design, fully bolt-on construction, protected winch mount and the best approach angle on the market. The high clearance design makes your Titan XD look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to run 37\" tires without any bumper interference. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Titan XD. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 125lbs (or 62lbs in aluminum) through careful design work. This means less stress on your suspension and drivetrain components.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 2016-2022 Nissan Titan XD as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Nissan Titan owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Nissan Titan frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Nissan Titan frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Nissan Titan's frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 125lbs for the steel bumper and 62lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Nissan Titan is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit comes with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required. Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness, thus maintaining all of the factory switches on your steering column. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plug connector. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePlease Note:\u003c\/b\u003e This bumper kit is only a direct fit for the Titan XD. For non-XD Titan models, the vehicle frame ends sooner and you will need to build your own frame extension brackets in order to mount this bumper kit. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFully compatible with factory parking sensors - simply pop them out of your stock bumper and into the precision CNC cut outs in this replacement bumper \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (63lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 12 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264246403356,"sku":"CO5116","price":887.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_06e41d23-7af2-4049-9331-0d996ba1fa59.jpg?v=1783517150"}],"url":"https:\/\/shop-au.dev-everfruitdigital.com\/collections\/nissan-titan.oembed","provider":"Coastal Offroad","version":"1.0","type":"link"}